| BATTERY INFO | Capacity: | 537Wh (22.4V, 24Ah) | |
|---|---|---|---|
| Cell Chemistry: | LiFePO4 (Lithium Iron Phosphate) | ||
| Life Cycles: | 2,500+ Cycles to 80% Original Capacity | ||
| Shelf-life: | Recharge to 80% Every 3-6 Months | ||
| Management System: | MPPT Controller, BMS, etc. | ||
|
|
OUTPUT | AC Outlets: | 2x 220-240V AC Outputs, 700W In Total |
| Inverter Type: | Pure Sine Wave | ||
| Surge Power: | 1,400W | ||
| USB-C Port: | 1 x 100W Max. | ||
| USB-A Port: | 4 x 5V/3A | ||
| 12V DC Outlets: | 1 x 12V/10A (Car Outlet) 2 x 12V/10A (DC5521) |
||
| Wireless Charging Pad: | 1 x 16W Max. | ||
|
|
INPUT | AC Adapter Input: | 200W Max. |
| Solar Input: | 200W Max,OCV 12-28V, 8A | ||
| Car Input: | 12/24V from Cigarette Lighter Port | ||
| Maximum Input: | 400W, with AC+Solar Input | ||
|
|
|||
| RECHARGE TIMES | AC Adapter (200W): | ≈3 Hours | |
| Solar (200W): | ≈3 Hours (With prime sunshine, ideal orientation and low temperature) | ||
| 12V/24V Car Outlet (100W/200W): | ≈6.1 or 3.4 Hours | ||
| AC+ Solar (400W): | ≈1.8~2.3 Hours (With prime sunshine, ideal orientation and low temperature) | ||
| Dual AC (400W): | ≈1.8~2.3 Hours (Extra adapter is REQUIRED) | ||
|
|
|||
| GENERAL | Scalability: | No. Enter for BLUETTI expandable power stations | |
| Pass-through Charging : | Yes | ||
| Weight: | 16.5lbs(7.5kg) | ||
| Dimensions (LxWxD): | 10.94*7.87*7.79 in(27.8*20*19.8cm) | ||
| Operating Usage Temperature: | -4-104℉ (-20-40℃)/ | ||
| Storage Temperature: | 14-113℉ (-10-45℃) | ||
| Certifications: | UL, CEC, DOE, FCC, CA Prop 65 | ||
| Warranty: | 24 Months (Enter to learn more about BLUETTI warranty policy) | ||
|
|
|||
| WHAT’S IN THE BOX | BLUETTI EB55 700W/537Wh Portable Power Station: | × 1 | |
| 200W AC Adapter & Charging Cable（7909）: | × 1 | ||
| Solar Charging Cable (MC4 to XT60-F): | × 1 | ||
| Car Charging Cable (Car to XT60-F): | × 1 | ||
| User Manual: | × 1 | ||
| 24-Month Warranty: | × 1 | ||
FAQS
A:
EB55 can handle most of your devices under 700W.
Note: For some devices with motor/compressor, the initial start-up power may be 2-4 times the rating, which may trigger overload/overcurrent protection.
A:
Working time (estimation) = 537Wh* 0.85 / operating power of your device. (0.85=Conversion Rate) Please note that the actual working time may vary under different situations.
A:
The solar panel must meet:
1. Open Circuit Voltage (OCV) between 12V-28V;
2. Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.
Best Companion:
1*BLUETTI SP200 (200W), fully recharge from 0-100% in 3.5-4 hours.
1*BLUETTI SP120 (120W), fully recharge from 0-100% in 6-6.5 hours.
Friendly Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels.
A:
Yes, the EB55 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.But please note that this unit cannot be used as an UPS.
A:
No. Also, please do NOT store it in a humid environment for a long time.
Product Application
Struggling between power and flexibility? We got you covered! With two expansion ports, The AC200MAX welcomes up to two BLUETTI B230’s(2048Wh each) or B300(3072Wh each) battery modules, connecting of which can boost the total capacity to a staggering 8192Wh!
With AC200MAX’s 15 outlets, you get to run all your needs simultaneously without breaking a sweat.
